… choice of the protective means for asynchronous motors operated within industrial shop
electric circuits under challenging conditions … article is justification of the possibility of the above …

… for the protection unit of asynchronous motors having a wide … of such a condition is practically
not feasible. Therefore, we … the methodology for choosing the protection of electric drives …

… asynchronous machine (6000 HP) working as a motor or generator (M/G) depending on the
slip defined by the motor … the most likely operating conditions of this induction machine. Fig. …

… to verify the feasibility of recycling and remanufacturing of the asynchronous motor. A simple
economic comparison was made with scrapped and manufactured new motors to verify the …

… AC supply to DC by means of diodes … selection guidelines and the important parameters
that should not be neglected. It is important to protect the system when connects n similar motors …

… The switch of choice in a modern drive is the IGBT (or … The ability to isolate a faulty
phase-leg opens the possibility of … first means for providing fault tolerance in an induction motor …

… The possibility of using the proposed stand, which will allow … the technical condition of
asynchronous engines during … are located in a separate protected room. The test table 6 is …

… terms of cutting speed and the possibility of reduced diameter drill … of a 10-kW 75 000-r/min
induction machine (IM) for an electrically … The shaft diameter influences the bearings selection …

… on transformer, generator, and induction motor, respectively. The … Selection of sensors will
rely on the monitoring method and … windings, so that the possibility of reconstruction of original …

… shortterm machine protection and in longer term condition … squirrel cage induction motor,
show the industrial viability of … The method to be proposed is based on the proper selection of …