ENERGY- AND ENVIRONMENTALLY EFFICIENT BUILDING MIXTURES FOR 3D PRINTING
DOI:
https://doi.org/10.30890/2709-2313.2025-43-01-002Keywords:
Portland cement, fly-ash, alkaline activator, alkali-ash binders, 3D construction printer, superplasticizerAbstract
The work shows the possibility of obtaining fine-grained concrete mixtures and concretes using mechanochemical activated cement-ash binders, which can be used as working mixtures for a 3D printer. The choice of raw materials solve the problem of resourceMetrics
References
Perrot, A.; Rangeard, D.; Courteille, E. 3D Printing of Earth-Based Materials: Processing Aspects. Constr Build Mater 2018, 172, 670–676, doi:10.1016/J.CONBUILDMAT.2018.04.017
Ali, M.H.; Issayev, G.; Shehab, E.; Sarfraz, S. A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering. Rapid Prototyp J 2022, 28
Wang, B.; Zhai, M.; Yao, X.; Wu, Q.; Yang, M.; Wang, X.; Huang, J.; Zhao, H. Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes. Buildings 2022, 12, doi:10.3390/buildings12030374
Flatt, R.J.; Wangler, T. On Sustainability and Digital Fabrication with Concrete. Cem Concr Res 2022, 158, doi:10.1016/j.cemconres.2022.106837
Jin Hyun Lee, Jae Hong Kim, Matric suction and its effect on the shape stability of 3D printed concrete, Cement and Concrete Research,Volume 159, 2022, 106864, ISSN 0008-8846, doi:10.1016/j.cemconres.2022.106864
T. Wangler, E. Lloret, L. Reiter, N. Hack, F. Gramazio, M. Kohler, M. Bernhard, B. Dillenburger, J. Buchli, N. Roussel, R. Flatt. Digital concrete: opportunities and challenges. RILEM Tech. Lett., 1 (2016), pp. 67-75, doi:10.21809/rilemtechlett.2016.16
Agustí-Juan, F. Müller, N. Hack, T. Wangler, G. Habert. Potential benefits of digital fabrication for complex structures: environmental assessment of a robotically fabricated concrete wall. J. Clean. Prod., 154 (2017), pp. 330-340, doi:10.1016/j.jclepro.2017.04.002
Panda, B.; Ruan, S.; Unluer, C.; Tan, M.J. Improving the 3D Printability of High Volume Fly Ash Mixtures via the Use of Nano Attapulgite Clay. Compos B Eng 2019, 165, doi:10.1016/j.compositesb.2018.11.109
Hager I., Golonka A., Putanowicz R. 3D printing of buildings and building components as the future of sustainable construction? // Procedia Engineering. 2016. № 151. P. 292–299. doi:10.1016/j.proeng.2016.07.357
Wu, Y.; Liu, C.; Bai, G.; Liu, H.; Meng, Y.; Wang, Z. 3D Printed Concrete with Recycled Sand: Pore Structures and Triaxial Compression Properties. Cem Concr Compos 2023, 139, doi:10.1016/j.cemconcomp.2023.105048
S. Bhattacherjee, A.S. Basavaraj, A.V. Rahul, M. Santhanam, R. Gettu, B. Panda, E. Schlangen, Y. Chen, O. Copuroglu, G. Ma, L. Wang, M.A. Basit Beigh, V. Mechtcherine. Sustainable materials for 3D concrete printing Cem. Concr. Compos., 122 (2021), Article 104156, doi:10.1016/j.cemconcomp.2021.104156
M.K. Mohan, A.V. Rahul, G. De Schutter, K. Van Tittelboom. Extrusion-based concrete 3D printing from a material perspective: a state-of-the-art review. Cem. Concr. Compos., 115 (2021), Article 103855, doi:10.1016/j.cemconcomp.2020.103855
Dvorkin, L.; Marchuk, V.; Hager, I.; Maroszek, M. Design of Cement–Slag Concrete Composition for 3D Printing. Energies (Basel) 2022, 15, doi:10.3390/en15134610
Yu Chen, Stefan Chaves Figueiredo, Zhenming Li, Ze Chang, Koen Jansen, Oğuzhan Çopuroğlu, Erik Schlangen, Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture, Cement and Concrete Research, Volume 132, 2020, 106040, ISSN 0008-8846, doi:10.1016/j.cemconres.2020.106040
Sanytsky, M.; Sobol, H.; Markiv, M. Modified cement composites. NULP, Lviv, Ukraine, 2010, 132 p. (in Ukraine)
Sanytsky, M.; Marushchak, U.; Olevych, Y.; Novytskyi, Y. Nano-Modified Ultra-Rapid Hardening Portland Cement Compositions for High Strength Concretes. In Lecture Notes in Civil Engineering; 2020; Vol. 47
Ivashchyshyn H., Sanytsky M., Kropyvnytska T., Rusyn B. Study of low- emission multi-component cements with a high content of supplementary cementitious materials // Eastern-European Journal of Enterprise Technologies. 2019. Vol. 4, № 6 (100). P. 39–47
Chen, Y.; Veer, F.; Copuroglu, O.; Schlangen, E. Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing. In RILEM Bookseries; 2019; 19
Dvorkin, L.; Marchuk, V.; Mróz, K.; Maroszek, M.; Hager, I. Energy-Efficient Mixtures Suitable for 3D Technologies. Appl. Sci. 2024, 14, 3038. doi:10.3390/app14073038
Hager, I.; Maroszek, M.; Mróz, K.; Kęsek, R.; Hebda, M.; Dvorkin, L.; Marchuk, V. Interlayer Bond Strength Testing in 3D-Printed Mineral Materials for Construction Applications. Materials 2022, 15, doi:10.3390/ma15124112
Dvorkin L., Zhitkovsky V., Sonebi M., Marchuk V., Stepasiuk Y. Improving Concrete and Mortar Using Modified Ash and Slag Cements. London: Boca Raton CRC Press, 2020. 184р
Wang, B.; Zhai, M.; Yao, X.; Wu, Q.; Yang, M.; Wang, X.; Huang, J.; Zhao, H. Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes. Buildings 2022, 12, 374. doi:10.3390/buildings12030374
Du, Y.; Wang, S.; Hao, W.; Shi, F; Wang, H.; Xu, F.; Du, T. Investigations of the Mechanical Properties and Durability of Reactive Powder Concrete Containing Waste Fly Ash. Buildings 2022, 12(5), 560
Dvorkin, L.; Konkol, J.; Marchuk, V.; Huts, A. Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly Ash. Polymers 2022, 14, 5467. doi:10.3390/polym14245467
Krivenko, P. Why Alkaline Activation - 60 Years of the Theory and Practice of Alkali-Activated Materials. Journal of Ceramic Science and Technology 2017
Dvorkin L., Dvorkin O., Ribakov Y. Multi-Parametric Concrete Compositions Design. Nova Science Publishers, New York, 2013. – 223 p
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
