IDENTIFICATION OF INDUCTION MOTOR PARAMETERS IN VECTOR CONTROL ELECTRIC DRIVES

Authors

DOI:

https://doi.org/10.30890/2709-2313.2024-26-00-006

Keywords:

Identification, device of observation, tuning coefficients, sample model, asynchronous electric drive, vector control

Abstract

The paper is devoted to the questions of identifying coordinates and parameters of asynchronous engine and the increase of the quality of electromechanical transition processes of asynchronous electric drive with a vector control at indirect determination

Metrics

Metrics Loading ...

References

Bhattacharya, S. & Singh, B. 2006. Control of Machines. New Age International (P) Limited, Publishers. 354 p.

Gönen, T. 2012. Electrical Machines with MATLAB. CRC Press.

Popescu, M. 2000. Induction motor modelling for vector control purposes, 144.

Prasad, R. 2005. Fundamentals of Electrical Engineering. Prentice-Hall of India (Private), Limited

R. H. Park, "Definition of an ideal synchronous machine and formula of armature flux linkage", G.E. Review, vol. 31, pp. 332-334, 1928.

A. A. Gorev, Transient Processes of synchronous Machine, Moscow, Leningrad: Gosenergoizdat Publishing, 1950.

V. O. Kostiuk and T. O. Kostyuk, "Effective Reduction Techniques of the Park Equations to Tackle Power System Stability Problems," 2019 IEEE 6th International Conference on Energy Smart Systems (ESS), Kyiv, Ukraine, 2019, pp. 92-97, doi: 10.1109/ESS.2019.8764174.

V.O. Kostiuk and T.O. Kostiuk, "Equations of Quasi-stationary Modes and Frequency-response Characteristics of Multimachine Electric Power System", 2019 IEEE 2nd Ukraine Conference on Electrical and Computer Engineering (UKRCON) Proceedings IEEE Xplore, pp. 327-333, 2019.

Tryputen, M., Kuznetsov, V., Kuznetsova, A., Tryputen, M., Kuznetsova, Y., Serdiuk, T. (2021) “Improving the Reliability of Simulating the Operation of an Induction Motor in Solving the Technical and Economic Problem”, In: Hu Z., Petoukhov S., Dychka I., He M. (eds) Advances in Computer Science for Engineering and Education III. ICCSEEA 2020. Advances in Intelligent Systems and Computing, vol 1247. Springer, Cham. https://doi.org/10.1007/978-3-030-55506-1_13

Kuznetsova, Y., Kuznetsov, V., Tryputen, M., Kuznetsova, A. Tryputen, M., Babyak, M. Development and Verification of Dynamic Electromagnetic Model of Asynchronous Motor Operating in Terms of Poor-Quality Electric Power (2019) 2019 IEEE International Conference on Modern Electrical and Energy Systems (MEES), Kremenchuk, Ukraine, 2019, pp. 350-353, doi: 10.1109/MEES.2019.8896598.

Eldali F. A Comparitve Study between Vector Control and Direct Torque Control of Induction Motor Using MATLAB SIMULINK [Thesis]. USA: Colorado State University; 2012

Blaschke F. Daz Prinzip der Feldorientierung – die Grundlage für die Transvektor-Regelung von Drehfeldmaschinen. – Siemens-Zeitschrift. - 1971. Bd. 45. №10.- P. 757-760.

Lozinskyi O.Yu., Misurenko V.O. Funktsionalni mozhlyvosti ta osoblyvosti nalashtovuvannia asynkhronnykh chastotno-kerovanykh elektropryvodiv ALTIVAR (SCHNEIDER ELECTRIC) [Functional capabilities and features of setting asynchronous frequency-controlled electric drives ALTIVAR (SCHNEIDER ELECTRIC)] // Vestnik KhHPU. Problems of the automated electric drive. Theory and practice. Kharkiv: 2000. - No. 113. - P. 217-218. (in Ukrainian)

Rabi Narayan Mishra, Kanungo Barada Mohanty, Development and implementation of induction motor drive using sliding-mode based simplified neuro-fuzzy control, Engineering Applications of Artificial Intelligence, Volume 91, 2020, ISSN 0952-1976, https://doi.org/10.1016/j.engappai.2020.103593.

Koyana M., Sugimoto H. Effects on parameter change on coordinate control system of induction motor // Proc. IPEC (Tokyo). - 1983. - P. 684-695.

Leonhard W. Control of AC machines with the help of microelectronics // 3-th IFAC Symposium on Control in Power Electronics and Electrical Drives, - Lausanne, 1983. - P. 35-57.

Gabriel R. and Leonhard W. Microprocessor control of induction motor // Proc. IEEE Int. Semicond. Power Conv. Conf. - 1982. - P. 385.

V. V. Athani and S. M. Deshpande, "Microprocessor Control of a Three-Phase Inverter in Induction Motor Speed Control System," in IEEE Transactions on Industrial Electronics and Control Instrumentation, vol. IECI-27, no. 4, pp. 291-298, Nov. 1980, doi: 10.1109/TIECI.1980.351646.

P. S. Wibowo and S. Riyadi, "SPWM Volt/Hz Based Speed Control of Induction Motor," 2019 International Seminar on Application for Technology of Information and Communication (iSemantic), Semarang, Indonesia, 2019, pp. 482-486, doi: 10.1109/ISEMANTIC.2019.8884311.

A. V. Krumov, "Maximum torque high speed microprocessor based control of induction motors," 2009 International Symposium ELMAR, Zadar, Croatia, 2009, pp. 175-180.

Published

2024-01-30

How to Cite

Kuznetsov, V., Dmytro, T., & Nikolenko, A. (2024). IDENTIFICATION OF INDUCTION MOTOR PARAMETERS IN VECTOR CONTROL ELECTRIC DRIVES. European Science, 1(sge26-01), 58–103. https://doi.org/10.30890/2709-2313.2024-26-00-006